News & Insights

Cooling Agent WS-23: A Formulator’s Guide to Handling and Blending

By Baisifu Cooling Agents Division

Cooling Agent WS-23: A Formulator’s Guide to Handling and Blending

Cooling agents rise or fall on how easily they enter a formula, and WS-23 scores highly on that practical test. Because WS-23 melts at only 58–61°C and dissolves readily in propylene glycol and vegetable glycerin, it enters liquid systems with minimal effort. Consequently, formulators treat it as the default burst grade for e-liquids and a reliable cool for beverages and confectionery. This guide covers the handling steps that keep WS-23 clear, the dosing logic behind a clean burst, and the blends that add longevity.

Why WS-23 handles easily at low heat

WS-23 (N,2,3-Trimethyl-2-isopropylbutyramide, CAS 51115-67-4) arrives as a white crystalline powder with ≥99% purity (HPLC). First, its melting point of 58–61°C sits well below that of most WS grades, so heat-sensitive lines need less energy to bring it into solution. Next, it dissolves in PG and VG, the two carriers that dominate e-liquid and flavor systems. In addition, with a flash point above 100°C and a two-year shelf life, it stores and ships without special handling. Most importantly, its fast-onset, fast-decay profile means a small addition delivers the whole burst, so you avoid overloading a formula.

How to pre-dissolve and dose WS-23

Start by pre-dissolving WS-23 in ethanol or propylene glycol, then add the solution to the water phase; alternatively, dissolve it into the flavor system first, then dose. Because WS-23 is insoluble in water, skipping this step leaves undissolved crystals and an uneven cool. Next, add the premix slowly under agitation so the burst distributes evenly across the batch. As a result, you get a clear, stable liquid with no grittiness or hot spots. Therefore, match the dosage to the format — light for e-liquids and beverages, higher for chewing gum and confectionery.

When to blend WS-23 with slower grades

A pure burst cools fast and fades fast, which suits some products but not all. For this reason, formulators blend WS-23 with WS-3 or WS-5 when the brief calls for burst plus longevity. First, WS-23 supplies the immediate hit on the front of the mouth. Next, the slower grade carries the cool through the finish. Meanwhile, WS-27 offers a finer-crystal upgrade when dissolution speed and a bitter-free finish matter most. In short, treat WS-23 as the opening note of a cooling system rather than the entire profile.

Compare WS-3 and WS-5, or read the

See the WS-series applications guide for dosages by category.

Need a cooling recommendation for your product? Send us your formulation target - we reply within one business day.

Request a Sample →
← Back to all insights

Chat on WhatsApp

+86 13072980070 +86 13519147002
WhatsApp